产品中心product
0635-8882800
性能指数分析
Analysis of performance index
1.冷拔异型钢管的性能指数分析-塑性
Performance index analysis of 1. special-shaped steel tubes - plasticity
塑性是指金属材料在载荷作用下,产生塑性变形(永久变形)而不破坏的能力。
Plasticity refers to the ability of metal materials to produce plastic deformation (permanent deformation) without damage under load.
2.高精度冷拔异型管的性能指数分析-硬度
Performance index analysis of 2. special-shaped steel tubes - hardness
硬度是衡量金属材料软硬程度的指针。目前生产中测定硬度方法最常用的是压入硬度法,它是用一定几何形状的压头在一定载荷下压入被测试的金属材料表面,根据被压入程度来测定其硬度值。
Hardness is a pointer to measure the hardness and hardness of metallic materials. At present, the most commonly used method of measuring hardness is the pressure entry hardness method. It is pressed into the surface of the metal material under a certain load with a certain geometry, and the hardness value of the material is measured according to the degree of pressure.
3. 无缝异型钢管的性能指数分析-疲劳
Performance index analysis of 3. special-shaped steel tubes - fatigue
前面所讨论的强度、塑性、硬度都是金属在静载荷作用下的机械性能指针。实际上,许多机器零件都是在循环载荷下工作的,在这种条件下零件会产生疲劳。
The strength, plasticity and hardness discussed above are all mechanical properties of metal under static load. In fact, many machine parts work under cyclic load. Under this condition, parts will produce fatigue.
4. 异型钢管的性能指数分析-冲击韧性
Performance index analysis of 4. special-shaped steel tubes - impact toughness
以很大速度作用于机件上的载荷称为冲击载荷,金属在冲击载荷作用下抵抗破坏的能力叫做冲击韧性。
The load acting on a machine at a great speed is called impact load. The ability of metal to resist failure under impact load is called impact toughness.
5. 异型钢管的性能指数分析-强度
Performance index analysis of 5. special-shaped steel tubes - strength
山东众达金属制品有限公司【销售热线:0635-8882800 手机:15563579567】是专业生产异形钢管、精密钢管厂家,可根据客户要求,生产各种规格异形钢管范围如下:
1:外径:Ф4mm~Ф325mm;
2:壁厚: 0.8mm~80mm;
3:表面粗糙度:Ra=0.2、0.4、0.6、0.8
4:尺寸精度:0.03~0.06
5:执行标准:GB/3639─2000; GB/8723─99
6:材质:10#、20#、35#、45#、35CrMo、42CrMo;不锈钢201、304、316L等。
众达钢管销售热线:0635-8882800
免责声明:所提供的信息及资料除原创外,部分资讯来源于网络等媒体仅供参考,不作为直接决策建议。如无意中侵犯您的合法权益,请及时联系与处理。
相关产品推荐: 外方内圆钢管 外四方内圆无缝钢管、 40Cr精密内六角管、 PTO三角柠檬管、 【按图定制】齿轮钢 外齿内圆管 外圆内齿管 精拉直齿钢管厂家、 冷拉加芯小口径六角钢管厂家、 外异型内圆钢管、 45#六角无缝钢管 六角钢管规格 冷拉六角钢管、 20#猫面传动轴钢管 搅拌机猫面钢管 冷拔三角管、 内外六方钢管、 大口径六角管、
外圆内螺旋管、冷轧精密内螺旋管、异型钢管、精拉内螺纹钢管、外圆内螺纹钢管、内齿螺旋管、光亮内螺纹钢管、…
山东众达金属制品有限公司集穿孔、热轧、冷拔、冷轧(精轧)生产销售于一体,公司拥有从热穿孔到成品出厂的全套生产设备与检测手段。
众达金属拥有大中型穿孔生产线3条,冷拔机12台、冷轧机18台,连续式恒温热处理炉2座;还有钢管涡流探伤设备1套、检测中心等辅助生产设施,完备的生产设备设施已经形成了完整的无缝钢管生产流水线。
特色品种有:结构钢管,流体钢管,合金管,压力容器管(气瓶管,低中压锅炉管,高压锅炉管,高压化肥管,石油裂化管),汽车半轴套管,液压支柱管,石油管,地质管,冷拔钢管,精拨加芯钢管、冷轧精密钢管、异型管、异型材等产品。
...
专业品质, 规格齐全
供货迅速
多年研发经验
造就优秀产品质量
所有产品均可开具增
值专用发票
产品技术支持
7x24小时保障